Makita VR001C Instruction Manual

14ENGLISHOperation Symptom 1 Symptom 2 Cause RemedyVibrator does notstartThe LED lamp on theinverter case is not lit.The power indicatoron the portable powerpack is blinkinggreen.Battery power is low.Or, it is not installedcorrectly.Check the batterylevel indicator. Ifthe battery level issufficient, checkhow the battery isinstalled.Portable power packor power cord is hot.Cool the portablepower pack.The plug on thevibrator is notproperly connectedto the socket on theportable power pack.Or, the cable isdisconnected.Make sure the plugis firmly connected tothe socket.In case ofdisconnection,inspection and repairare required.The LED lamp on the inverter case issolid red.The vibrator hasstopped becausea fault has beendetected.Turn the portablepower pack back on.If the LED lamp lightsup red repeatedly,inspection and repairare required.The LED lamp on the inverter case isblinking red.The vibrator'serroneous startprevention function isactivated.Turn the vibratorOperation Switch toOFF once and thenturn it to ON again.SPECIFICATIONSModel VR001C VR002C VR003C VR004COutput 250 W 400 WVoltage 36 VCurrent 8.7 A 14.0 AFrequency 200 HzTotal length 1,945 mm(76-9/16″)3,445 mm(135-5/8″)1,977 mm(77-27/32″)3,477 mm(136-7/8″)HeadDiameter x Length43 x 255 mm(1-11/16″ x 10-1/32″)52 x 287 mm(2-1/16″ x 11-5/16″)External HoseDiameter x Length33 x 1,500 mm(1-5/16″ x 59-1/16″)33 x 3,000 mm(1-5/16″ x 118-1/8″)33 x 1,500 mm(1-5/16″ x 59-1/16″)33 x 3,000 mm(1-5/16″ x 118-1/8″)Mass 4.8 kg(10.6 lbs)5.9 kg(13.0 lbs)5.6 kg(12.4 lbs)6.7 kg(14.8 lbs)* Mass does not include power supply equipment such as portable power pack and batteries.1 23► 1. Head Length 2. External hose length 3.Total length