Makita VR001C Instruction Manual

4ENGLISH21. Maintain power tools. Check for misalignment orbinding of moving parts, breakage of parts andany other condition that may affect the power tool’soperation. If damaged, have the power tool repairedbefore use. Many accidents are caused by poorlymaintained power tools.22. Keep cutting tools sharp and clean. Properlymaintained cutting tools with sharp cutting edgesare less likely to bind and are easier to control.23. Use the power tool, accessories and tool bits etc.in accordance with these instructions, taking intoaccount the working conditions and the work to beperformed. Use of the power tool for operationsdifferent from those intended could result in ahazardous situation.Battery tool use and care24. Recharge only with the charger specified by themanufacturer. A charger that is suitable for one typeof battery pack may create a risk of fire when usedwith another battery pack.25. Use power tools only with specifically designatedbattery packs. Use of any other battery packs maycreate a risk of injury and fire.26. When battery pack is not in use, keep it away fromother metal objects, like paper clips, coins, keys,nails, screws or other small metal objects, that canmake a connection from one terminal to another.Shorting the battery terminals together may causeburns or a fire.27. Under abusive conditions, liquid may be ejected fromthe battery; avoid contact. If contact accidentallyoccurs, flush with water. If liquid contacts eyes,additionally seek medical help. Liquid ejected fromthe battery may cause irritation or burns.Service28. Have your power tool serviced by a qualified repairperson using only identical replacement parts.This will ensure that the safety of the power tool ismaintained.29. Follow instruction for lubricating and changingaccessories.30. Keep handles dry, clean and free from oil and grease.PRODUCT SAFETY WARNINGS1. This product is a vibrator for compacting concrete.Do not use the vibrator for any other purpose.2. Be sure to read and understand this instructionmanual carefully before using the product so thatit can be operated safely and efficiently. Impropermachine use may result in injury or machine failure.Keep this manual for further reference.3. This product should be used by connecting it to theMakita portable power pack “PDC01” or “PDC1200.”Also, read the instruction manuals for the portablepower pack and the battery charger.4. Never use this product while connected to any otherpower supply device. Doing so may result in damageto the circuit board or burnout of the motor. Thedamage or motor burnout may destroy the insulationand cause electric shock.5. Do not use any battery other than the dedicatedbattery specified by Makita for the portable powerpack. Also, do not use batteries that have beenmodified (including batteries that have beendisassembled and the cells or other internal partsreplaced).6. Do not charge the battery with anything other thanthe included charger.7. The term “battery cartridge” in this manual ishereinafter referred to as “battery.”8. Handle and maintain this product appropriately toensure safe operation.9. When you lend this product to another person, besure to provide them the manuals and to fully explainto them the safe and appropriate use of the product.10. The specifications in this document are subject tochange without notice due to modification.11. This product complies with these EMC standards:EN61000-6-2 / EN61000-6-4.This product does not comply with these EMCstandards: EN61000-6-3 / EN55014-1.12. When using this product near other electronicdevices, it may cause radio interference.At that time, users of this product may need to takeappropriate measures.