Malibu Boats Boat User Manual

Contents

Malibu Boats Boat User Manual Manual pdf 86 page image

2-20Clock/Hour DisplayPress the E to display the setup screen “Clock/Hour Display.” The month, day and yearwill be displayed. Set month first, press enter “E (Enter)” to move to the next selection; toset the day, press “E (Enter)”, then completed hour, day, then “E (Enter)”. Once the yearis set, the selection will continue to set the time. Set each minute second; to move to thenext screen, press “E (Enter)” up ↑ arrow. The next display panel will be shown.TemperatureThe air and water temperatures are shown on the display panel. Temperature can bedisplayed in either Fahrenheit or Celsius. See English/Metric operation in the SETUPmenu to change view.DepthThe depth meter will display lake depth, and can be set for shallow water alarm. To setthe shallow water settings, press the “E (Enter)” on the display panel. The display will beflashing. Scroll through the settings until the desired water depth is set. The system is setto default at 2 ft. Once this is completed, press “E (Enter)” to return to main menu.Note: The Depth graphical display only displays the bottom of the lake up to 20 feet ofdepth.For boats equipped with optional depth finders, the depth system may lose its lock on thebottom if speeds exceed 20 MPH. This is normal. The depth system should reacquire thebottom once the boat has slowed to under 20 MPH.MPH/RPMYour dash display can also be set to display boat running speeds and RPM. If yourspeedometer needs correction due to changes in the system, it can be done using theMPH mode screen (see Speed Calibration).Speed CalibrationThe speed can be calibrated manually when the boat speed is between 15 and 36 MPH.To calibrate, scroll through the display menu to MPH/RPM. Press and hold “E (Enter)” toenter. Highlight MPH and use arrow buttons to adjust speed UP or DOWN. Press “E(Enter)” to exit. The MPH mode is all that can be recalibrated.Malibu Cruise ControlFigure 2-9. Cruise Controlcruisecruise