NAD VISO FIVE Owner's Manual

Also see for VISO FIVE: Catalog Brochure Datasheet Owner's manual Service manual

NAD VISO FIVE Owner's Manual Manual pdf 19 page image

DISC AUDIODIGITAL OUTSet VISO FIVE’s “Digital Out” according to the type of audio system you use.Bitstream: Select “Bitstream” if you connect the VISO FIVE’s digital OUTjack to an amplifier or other equipment with a Dolby Digital, DTS orMPEG decoder.PCM: Select when connected to a two-channel digital stereoamplifier. DVDs encoded in Dolby Digital or MPEG will be automaticallydownmixed to two-channel PCM audio.DISC TYPESome DVD-Audio discs contain the DVD-Video content in addition tothe DVD-Audio content. You can choose DVD-Audio or DVD-Video modedepending on your preference.DVD-AUDIO : Select to playback both DVD-Audio and DVD-Videocontents. DVD-Audio content only may be played back depending onthe disc.DVD-Video : Select to playback only the DVD-Video content.NOTES• This setting is only available when no disc is loaded in the disc tray.• Selected mode becomes effective after you exit the setup menu.• When a DVD-Audio disc is played back, “DVD Audio” is shown in the VFD.• When you select “DVD-Video”, “DVD-Video” will be briefly shown in theVFD and then reverts to normal display playback information.MOVING TO ANOTHER GROUPSome DVD Audio discs divide content into different groups. Your playerenables you to quickly access different groups during playback via theon-screen display.1 Press DISP during playback2 Press [ ] to highlight “G”.3 Enter group number using the numeric buttons 0-9.PCM FORMATThe VISO FIVE is compatible with both 48 kHz and 96 kHz PCM formats.96kHz: Select to handle 96kHz signal - each type of signal will passthrough without any further processing.96kHz > 48kHz: Select for 96KHz signal to be automatically convertedto 48KHz enabling decoding of compatible media.DISC LANGUAGEAUDIO/SUBTITLE/MENUDepending on the DVD media, only the Audio, Subtitles and Menusrecorded on the DVD media are available. When a language is chosen, it willbecome the default setting unless the DVD media overrides the settings.Select among Original, English, French, German, Dutch, Spanish, Italian,Russian and Swedish as the desired language setting.If you do not want the disc’s subtitles to be shown, select “Off”.PARENTAL CONTROLPASSWORDPASSWORD is needed to gain access to the “Rating Level” below. Thefollowing are the steps for you to enable or change your password.1 While at “Password” line menu, press [ENTER]. A menu screen like theone shown below will appear2 Input the 4-digit “Old Password” – the preset “Old Password” is “2580”.3 You can now set your own password by entering your desired 4-digitpassword at the “New Password” option. Press [ENTER].4 After entering your new password, re-enter again your new 4-digitpassword at the “Confirm” option. Upon entering the correct passwordat “Confirm” option, the password menu window will turn off bringingyou back to “Parental Control” menu screen.NOTEIf the password entered at “Old Password” or “Confirm” window is incorrect,you will remain in the same menu item like “Old Password” or be returned to“New Password”. You cannot move forward to the next sequence unless thecorrect password is entered. Select “Exit” in the password menu screen to exitthe sequence if you are unable to enter the correct password.OPERATIONUSING THE VISO FIVE – VIDEO SETUP MENU19ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ