10-12 Click Mode Operating Instructions10.7.2 LimitThree most used limits are built-in into the analyzer: CISPR 14, CISPR22and CISPR11.Either one can be selected simply by pressing the relevant key.The limit will be loaded and all the calculations will be done with referenceto the selected limit:The Reference Standard for Click tests is always EN 55014-1 (orequivalent CISPR 14-1), which defines 4 different Limit Curves for Q-Peakaccording to Table 1, with following cross-correlation as for namesassigned on 9010 :014-1 --> Limit in Column 2014-2 --> Limit in Column 6014-3 --> Limit in Column 8014-4 --> Limit in Column 10Limit in Column 4 of Tab.1 is not used for Click test, as referred toLoad and Auxiliary terminals.
