11-56 PMM 9030/9060/9180 Frequency Extension11.18.5 To transfer data Choose the serial port used for the communication with the RF module andclick on “RS232”.The message “Please turn on the unit, then click OK” is displayed:The RF module turned on automatically, otherwise do it manually. Click on“OK”.The SW identifies the RF module model, displays FW release and installedFPGA, switch off the RF module and displays the message “Please turn on9030/9060/9180 again, then click OK”.Turn the RF model on manually and click on “OK”.The key “Update Firmware & FPGA” is now enabled; click on it to start thefirmware updating.FW and FPGA are both always updated: FW first, then the FPGA;updating FW or FPGA separately, or other procedures are notallowed.
