10-4 Click Mode Operating Instructions10.3 Enter the ClickModeTo enter Click Mode, press the corresponding key in the main menu, andimmediately the first window opens as following:With PMM 9010/03P /30P /60P press the Cond..ed A-B key in the initialmenu to enter the main menu where the Click Mode button appears.Fig. 10-1 ClickThis is the IDLE function, which allows a preliminary, free runningevaluation, at the selected frequency and level.The Click mode function has four commands:• Start• Clear: cancel and reset all data to start an idle test;• Report• SETUPAlways use Esc button to return to the previous view/condition.To increase test productivity the PMM 9010, PMM 9010/03P/30P/60P orPMM 9010F has some very unique features: it allows skipping as many as2 steps, as it may predict how many clicks would overcome the Lq limit andmay also advice the User if the next step would fail.Moreover, it makes a true Qpeak measure and not a mere thresholdcomparison, as only a fully digital receiver can detect whether a Qpeaklevel came from an unsaturated signal or not; an analogue analyzer onlyhas the final weighted Qpeak.
