21Daisy-chaining Your monitorsThe REMOTE IN/OUT terminals allow you to controlmultiple monitors using one remote control.Note: The connection of more than three PlasmaSync42/50PD1 or more with THROUGH OUT (VIDEO)terminals may degrade image quality.To do so:When using the VIDEO inputs:THROUGH OUT (VIDEO) Connections1. Connect THROUGH OUT BNC or S-VIDEO OUT toexternal components to relay the signal input atVIDEO IN(BNC-type), or S-VIDEO IN.When using the RGB inputs:THROUGH OUT Connections1. (RGB2): Connect the R.G.B.H/CS and V THROUGHOUT terminals to relay the signal input at the R.G.B.H/CS and V IN terminals.2. Connect the REMOTE IN of the monitor to the RE-MOTE OUT of the next monitor using the optional re-mote cable.Note: ''Plug and Play'' is not available for the RGB2 BNC terminals.Note: A maximum of 3 units can used which acascade connection. (VIDEO, RGB2)
