39Information ScreenThis permits a check on-screen of the resolution and dataof the signal that is currently being input.1. Align the cursor with icon (10) on the second page ofthe main menu and display the display mode.* When video input is selectedSOURCE: VIDEOMODE: NTSC, PAL, SECAMNote: NTSCis processed as 4.43 NTSC.Icon (10)Information screen* When RGB input is selectedSOURCE: RGB1, RGB2, RGB3“NO SIGNAL” is displayed when there is no signal.H-FREQ: Horizontal frequency (kHz)V-FREQ: Vertical frequency (Hz)H-POL: Polarity of the horizontal sync signalNeg./Pos. (Negative polarity/Positive polarity)V-Pol.:Polarity of vertical syncNeg./Pos. (Negative polarity/Positive polarity)2. Return to the main menu* Settings cannot be reset.* To delete the main menu, press the EXIT button oncemore.* The vertical frequency that is displayed in the displaymode can have a slight difference with respect to theactual vertical frequency of the connected input signal.Vertical signals of between 60 Hz and 70 Hz have anerror of plus/minus 3 Hz. Vertical signals of 70 Hz orgreater have an error of plus/minus 5 Hz. Thefrequency display of the display mode via the OSMsystem should always be regarded as a guideline.EXITSOURCE INFO.RGB1H-FREQ.V-FREQ.H-POL.V-POL.31.5kHz60.0HzNEGPOSSOURCE INFO.VIDEOMODE : NTSC
