NEC 42/50PD1 User Manual

Contents

NEC 42/50PD1 User Manual Manual pdf 46 page image

46Set Selection Screen for Allotting ID Numbers toMultiple Screens/Each SetThis sets the VIDEO WALL NO. and SET ID NO.ID Selection Screen2. Align the cursor with the desired itemID SELECTPOSITION / CONTROLMove upMove downID Selection Screen4. Return to the main menuThe display will go off when the EXIT button is pressedor when the DISPLAY TIME setting time has elapsed.3. Set to the desired valuePOSITION / CONTROLVIDEO WALL No.* The POSITION CONTROLß / © buttons are used toswitch the numbers from 1 through 6.* A press of the remote control CLEAR button causesa reset. (Initial value is ALL)SET ID No.* The POSITION CONTROLß / © buttons are used toenter numbers from 1 through 256. Note that entry ofnumbers higher than 256 is not possible.* A press of the remote control CLEAR button causesa reset. (Initial value is ALL)Note: When both ID numbers have been set, thepriority order will be as described below.VIDEO WALL > SET IDEXITID SELECT MENUVIDEO WALL NOSET NO: 1: 256Numbers go DOWN Number go UP1. Press the ID SELECT button of the remote controlThis displays the ID selection screen.* This function prevents multiple sets from beingcontrolled at the same time when ID numbers havebeen set to multiple screens/multiple sets and theremote control is being used.* Only sets with ID numbers that have been set withthis menu can be controlled. Note that the ID SELECTbutton is valid regardless of the ID.* This function is also valid when this set is controlledvia the RS-232C connector.Press the EXIT button twice.Press the EXIT button once to return to the main menu.To delete the main menu, press the button once more.