NEC 42/50PD1 User Manual

Contents

NEC 42/50PD1 User Manual Manual pdf 44 page image

44Other Setting Screens (1)This allows the following settings: WIDE MODE, COLORSYSTEM, RGB MODE, POWER ON MODE, POWERMANAGER, EXTERNAL CONTROL, HDTV SELECT,and ALL RESET.1. Align the cursor with icon (13) of the second page.The cursor is moved left and right with the POSITIONCONTROLß / © buttons.Other Setting Screens (1)Icon (13)2. Align the cursor with the desired itemPOSITION / CONTROLMove upMove down3. Press the ß / © buttons and set* The ß / © buttons are used to switch the variousitems in toggle fashion as described below.* WIDE MODE:NORMAL/FULL/STADIUM/ZOOM (Initial value:NORMAL)Note that only NORMAL/FULL area available in RGBmode.Selecting Native Resolutions for 848 x 480, 852 x 480 and640 x 480 input signalsThere are two controls in the PlasmaSync 42/50PD1 OSMmenus that allow you to set the monitor to displayresolutions with 848, 852 and 640 horizontal dots in theirtrue resolutions. These are located under icon #13 (tools)and icon #6 (auto).4. Return to the main menu* To delete the main menu, press the EXIT button once more.EXITWIDE MODECOLOR SYSTEMRGB MODEPOWER ON MODEPOWER MANAGEREXTERNAL CONTROLALL RESET: ZOOM: AUTO: STILL: OFF: OFF: LAST MEMWIDE MODECOLOR SYSTEMRGB MODEPOWER ON MODEPOWER MANAGEREXTERNAL CONTROLALL RESET: ZOOM: AUTO: STILL: OFF: OFF: LAST MEMThis is used in signal discrimination at the time ofRGB input.Note: When a moving picture is displayed in stillpicture mode, the screen will appear blurry.* POWER ON MODE:LAST MEM/VIDEO/RGB1/RGB2/RGB3 (Initialvalue: LAST MEM (Last Memory))* POWER MANAGER:This means Power management of RGB inputON/OFF (Initial value is OFF)* EXTERNAL CONTROL:OFF/1/2 (Initial value is OFF)RS-232C can be used when “1” selected.Open/Short control can be used when “2” is selected.At time of RGB input[MOTION]: Set when a scan converter or othermoving picture has been connected[STILL]: Set when displaying a personal com-puter screen[DTV]: Set when using digital broadcast orother sources with an RGB input* COLOR SYSTEM:AUTO/3.58 NTSC/PAL/SECAM/4.43 NTSC (Initial value:AUTO)* RGB MODE:RGB MODE is displayed at the time of RGB input, RGBMODE is not displayed at the time of video input.Initial value : STILLWhen inputting an 848 x 480 signal, align the cursor withicon # 13 (tools) at the top of the OSM window. Move thecursor down to WIDE MODE and use the POSITIONLEFT/RIGHT control to select NORMAL. The monitorwill display the signal at 848 x 480. If FULL is selected,the monitor will automatically expand the input signal to853 x 480.To choose between 640 x 480 and 852 x 480 resolutionsalign the cursor with icon 6 (auto) at the top of the OSMwindow, move the cursor down to MODE and...Use the POSITION LEFT/RIGHT control to select WIDEto display 852 x 480 in true resolution or to expand (stretch)640 x 480 to fill the screen from left to right. SelectNORMAL to display 640 x 480 resolution in its standard4:3 aspect ratio with vertical letterbox bars to the right andleft of the image.After selecting the desired setting, go to the Auto menu, setauto picture to OFF and use the Picture Adjust and FinePicture controls to adjust clock phase and frequency tosharpen the image, if necessary.