NEC 42/50PD1 User Manual
                                                                | |
Contents
| 
50AppendixSignal Identification For Raster PresetVIDEO NTSC*1VIDEO PAL*1 VIDEO SECAM*1640 X 240 (15.734kHz/59.94Hz)768 X 288 (15.557kHz/50.39Hz)640 X 400 (31.469kHz/70.086Hz)640 X 480 (31.469kHz/59.94Hz)640 X 480 (35kHz/66.667Hz)640 X 480 (37.861kHz/72.809Hz)640 X 480 (37.5kHz/75Hz)640 X 480 (43.269kHz/85.008Hz)640 X 480 (39.375kHz/75Hz)800 X 600 (35.156kHz/56.25Hz)800 X 600 (37.879kHz/60.31Hz)800 X 600 (48.077kHz/72.188Hz)800 X 600 (46.875kHz/75Hz)800 X 600 (53.674kHz/85.061Hz)832 X 624 (49.725kHz/74.55Hz)852 X 480 (31.722kHz/59.966Hz)848 X 480 (31.02kHz/60Hz)1024 X 768 (56.476kHz/70.069Hz)1024 X 768 (60.023kHz/75.029Hz)1024 X 768 (68.677kHz/84.997Hz)1024 X 768 (60.24kHz/74.93Hz)768 X 576 (31.389kHz/50Hz)640 X 480 (31.47kHz/59.9Hz)VU-6010 NTSC*2VU-6010 PAL*2IBM 400@70Hz*3VESA 480@60HzMAC @13''*6VESA 480@72HzVESA 480@75HzVESA 480@85Hz*4XGA-2 480@75HzVESA 600@56HzVESA 600@60HzVESA 600@72HzVESA 600@75HzVESA 600@85Hz*4MAC @16''*6I/O data wide*5VGA WIDE (NEC1)VESA 768@70HzVESA 768@75HzVESA 768@85Hz*4MAC @19''*6IDC-3000G PAL625PIDC-3000G NTSC 525P-----STILL------------------MOTIONCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCFactorysettingsUsersettingsRGBMODE--NORMAL--NORMAL-----------WIDE------NORMALMODE*7--NEGNEGNEGNEGPOS/NEGNEGNEGPOSNEGPOSPOSPOSPOSPOSPOS/NEGNEGPOSNEGPOSPOSPOS/NEGNEGNEG--NEGNEGNEGNEGNEGNEGPOSNEGPOSPOSPOSPOSPOSNEGPOSNEGPOSPOSNEGNEGYYYYY/NYYYYYYYYYY/NYYYYYY/NYYYYYYNYYYYYYYYYNYYYYYYYYSync polarityVerHor VerHor*1 Convert to 640 dots x 480 lines and display.*2 These signals cannot be displayed in the RGB3 input mode.*3 Display only 400 lines with the screen center of the vertical orientation located at the center.*4 The picture will be shaky when the moving images of video games, etc., are input. (In this case set the refresh rate to 75 kHz or less.)*5 Only when using an I/O DATA graphic accelerator board.*6 Use a separately sold signal adapter (mini D-Sub 15-pin) when connecting to a Macintosh computer.For some models, make the mini D-Sub 15-pin connection using the included RGB signal cable.*7 Make the settings to display these signals. The signals will not be displayed properly unless the correct settings are made.*The resolution deteriorates in comparison with the original image because the image of 640 dots x 480 lines is converted to 853 dots x 480 lines and displayed.*At the time of video input, video signals derived from poor recording conditions may give rise to a disturbed screen image.*The sync may be disturbed when non standard signals other than the aforementioned are input.*Multiple screens (2 screens) can only display signals having an aspect ratio of 4:3. *3 Cannot be used with multiple screens.*With digital inputs some signals are not accepted.*852 dot by 480 line signals are displayed with this resolution.*848 dot by 480 line signals are displayed at a resolution of 848 dots by 480 lines when “NORMAL” is selected, and converted to 853 dots by 480 lines when “FULL” is selected.Resolution(horizontal frequency/vertical frequency)Presence/absence of sync |
Related manuals for NEC 42/50PD1
manualsdatabase
Your AI-powered manual search engine