NEC 42/50PD1 User Manual

Contents

NEC 42/50PD1 User Manual Manual pdf 9 page image

9IntroductionContents of the PackageThe following lists all of the items included in yourMultiSync multimedia monitor package. Please save theoriginal box and packing materials for futuretransportation or shipment of this monitor.1. PlasmaSync 42/50PD12. Power cord3. Wireless/Wired remote control unit and two AAAbatteries4. Remote cable5. RGB cable (15-Pin mini D-Sub To 15-pin mini D-SubConnector)6. User' s manual7. Core (large) and two cores (small)OSM and IPM are trademarks of NEC Technologies, Inc.IBM PC/AT, PS/2, VGA, S-VGA, 8514/A and XGA areregistered trademarks of International Business MachinesCorporation.Apple and Macintosh are registered trademarks of AppleComputer, Inc.Microsoft is a registered trademark of MicrosoftCorporation. Windows is a trademark of MicrosoftCorporation.Introduction to the PlasmaSync42/50PD1This section introduces you to your new PlasmaSync 42/50PD1, provides a list of materials that comes with yourmonitor and describes the features and controls.The features you’ll enjoy include:* This unit can be used with IBM PC/AT compatible,Macintosh, and compatibles.(For details, see “Factory Setting Values Preset Table.”* Easy-to-operate multifunction remote control andexternal control connectorA single remote control can be used as a wireless or as awired remote control (with automatic switching by cableconnection) and the remote THROUGH OUT connectorpermits simultaneous operation of multiple monitors.(A maximum of 3 units can be connected.)The external control connector with a THROUGH OUTfeature permits various control functions to be madeexternally.* ID No. settings can be made for up to 256 units.* NTSC, PAL, SECAM, and M-NTSC composite videosignals can be accommodatedVideo signals from video cameras, video decks, videodisc players, and other video equipment adhering toNTSC as well as PAL, SECAM, and M-NTSC (with a4.43 MHz chroma signal) standards can be selected onscreen.* Varied set of input connectorsVideo input signals: BNC video connector, S videoconnector. Each type is equipped with its ownTHROUGH OUT connector, single system.Analog RGB input: mini D-Sub 15-pin connector, BNC(R, G, B, H/CS, V connectors). BNC is equipped with itsown THROUGH OUT connector, single system.* Can be used with Digital RGB input (DVI standardcompliant)* Can be used with multiple screens* Power management functionRGB3 input mode complies with DMPM (DigitalMonitor Power Management) of DVI.A great reduction in power consumption when not beingused is achieved through the VESA-proposed DPMSsystem.The unit can also be used with the Energy Star standard(in which case power consumption will be 15 W or lesswhen not being used).* The personal computer and the operating system that areto be connected must be compatible with VESA DPMS.Personal computers that are to be connected to the RGB3input must be compatible with DVI DMPM.* OSM (On Screen Manager) functionThe OSM function displays a variety of screen adjustmentand correction menus on the screen to allow fine settingsto be made.* Plug and Play compatibleThe RGB3 input is compatible with DDC2B only.Ready to be used with Plug and Play which are supportedby Windows 98 and Windows 95.(VESA DDC1 and DDC2 level B)* Windows 98 or Windows 95 and a personal computerwith VESA DDC are required to use Plug and Play.* Can be used with RS-232C