Setting System Board Jumpers 6-5BIOS Setup Access Jumper5. Replace the access cover (see “Replacing the AccessCover” in Chapter 5).6. Connect system power cables and monitor.7. Power on the system. The system boots.BIOS RecoveryIf an interruption occurs during the BIOS upgrade thatprevents continuation of the process, it is possible that theBIOS may be left in an unstable state. Use the followingprocedure to recover your BIOS.1. Turn off the power and unplug the system and anyperipherals.! WARNINGTurn off the system before you change any jumpersettings.2. Remove the access cover (see “Removing the AccessCover” in Chapter 5).JumpersBIOS Setup Access(J9C1)Access Allowed B(default)Access Denied B654321654321
