6-10 Setting System Board JumpersIf necessary, change the jumper setting by lifting theplastic block and placing it on the appropriate pins. Werecommend that you use needle-nose pliers to move ajumper.Processor Settings5. Reinstall any removed expansion boards (see “Installingan Expansion Board” in Chapter 5).6. Replace the access cover (see “Replacing the AccessCover” in Chapter 5).7. Power on the system.Processor/Bus Speed(J9C1)233-MHz Processor/66-MHz Bus SpeedJumpers also set PCI and ISA busfrequencies and bus/processorfrequency ratios.654321Jumpers654321CD200-MHz Processor/66-MHz Bus SpeedJumpersDC654654321321
