4-20 System BIOS and Utilities4. If the message “User Password Is Set” (or “SupervisorPassword Is Set”) appears in the Security Menu, thepassword has been set up successfully.! WARNINGIf the User Password Is Clear field (or SupervisorPassword Is Clear) appears in the Security Menu,the corresponding password feature is disabled.(Your system is not password protected.)How to Disable Password Protection1. From the Security Menu, highlight the “Set UserPassword” or “Set Supervisor Password” field(depending on which password you’re disabling).2. Type your password in the Enter Current Passwordfield, then press the Enter key.3. Don’t type anything in the Enter New Passwordfield — just press the Enter key.4. Again, don’t type anything in the Confirm NewPassword field — just press the Enter key.If the message “User Password Is Clear” (or “SupervisorPassword Is Clear”) appears in the Security Menu, the User(or Supervisor) password feature is disabled.Press the right arrow (cursor) key to move to the PowerMenu.Power MenuThe Power Menu can be used to enable or disable thesystem’s power management features. When the powermanagement option is enabled, the Power Menu displaysthe options shown in the following screen.
