NEC DigitalTalk MAX 2100 Owner's Manual

NEC DigitalTalk MAX 2100 Owner's Manual Manual pdf 9 page image

- 5-Chapter 2: Basic OperationsTurning On PhonePress and hold the P key for approximately two seconds toturn on the phone.The cellular signal strength indicator, the battery charge indica-tor, the time, the date, and the cellular service provider indicatorappear on the display. (See “Display Icons” on page 3.)Turning Off PhonePress and hold the P key for approximately two seconds toturn off the phone.Standby ModeOnce the phone is powered on, the phone enters the standbymode. (The above screen illustration depicts the phone instandby mode.) The standby mode remains displayed until a callis placed or received, a menu is accessed, or the phone is pow-ered off.Signal StrengthThe cellular signal is indicated on the display as ;( with themaximum of six bars indicating a strong signal. Although youcan use the phone without extending the phone antenna,extending the antenna can increase the strength of the receivedcellular signal.Battery Charge IndicatorThe battery charge indicator ( + ) shows the charge level of thebattery. When the battery charge drops to a low level, the phonedisplays the following warning message:RECHARGE BATTERYWhile displaying the recharge notification, the phone alsosounds a double beep up to six times at 10-second intervals.The phone then automatically powers off. See “Charging theBattery” on page 2.! , ;( +1 2 : 0 0 amJ an 0 1S E R V I C E