NEC Dterm PSIII User Manual

Also see for Dterm PSIII: User guide

Contents

NEC Dterm PSIII User Manual Manual pdf 32 page image

3-18 Using the PSIIIDterm PSIII User Guide - Revision 1Example: Press the “2” key once for “A,” twice for “B,” three times for“C” and four times for the number “2.” Press the SHIFT key toshift to lower case mode.Step 4 When the name is complete, press the FNC key. An Add Digits dialogbox displays (Figure 3-14).Figure 3-14 Add Digits dialog boxStep 5 Type in the desired number. If a pause is required (for example, afterentering 9 to gain access to an outside line), press HOLD to insert apause.Step 6 Press the FNC key to enter.Step 7 Press the FNC key again to confirm.After the registration is complete, a setting tone will ring. After twoseconds, the Directory Menu page will redisplay.To Edit a Directory EntryStep 1 Press FNC+1+1. A Directory dialog box displays (Figure 3-13).Step 2 Select [2] Edit and then press the FNC key or 1.Step 3 Press the Scroll T key to search the Directory in alphabetical order.Press the Scroll S key to search in reverse order.Step 4 Press the FNC key to select the entry to edit.Step 5 To edit the name, press the Scroll X key or Scroll W key to highlight theletter.Step 6 Press CLEAR to delete the letters or place the cursor at the desiredlocation and enter additional letters.Step 7 To edit the telephone number press the Scroll T key.Step 8 Press CLEAR to delete the numbers. Type additional numbers tochange the entry.Step 9 Press the FNC key twice to confirm the change, or press END/PWR tocancel.Add Digits?NOTEDo not remove the battery for at least one minute after entering a Directory or SpeedDial entry.