3-20 Using the PSIIIDterm PSIII User Guide - Revision 1Step 5 Type in the name using the character chart in Table 3-3 on page 3-17.Step 6 Press the FNC key to save the name. An Add Digits dialog box displays(Figure 3-18).Figure 3-18 Add Digits dialog boxStep 7 Type in the number and then press the FNC key to save the number.Step 8 Press the FNC key again to confirm.After the registration is complete, a setting tone will ring. After twoseconds, the Directory Menu page will redisplay.Accessing Voice MailTo access Voice Mail, press FNC+2. A Message Services dialog boxdisplays (Figure 3-19).Figure 3-19 Message Services dialog boxStep 1 Select [1] VM Access and then press the FNC key or 1. A dialog boxdisplays with the number.Step 2 Press L1 or L2* to dial the number.Add Digits?NOTEDo not remove the battery for at least one minute after entering a Directory or SpeedDial entry.NOTEThis feature depends on the external Voice Mail Server.NOTEWhen receiving a voice mail and text message, the LCD displays both VMM andTMM.[1]VM Access[2]TM ReviewVMMMSG Services
