Using the PSIII 3-33Dterm PSIII User Guide - Revision 1Station RingThis feature allows you to assign an incoming call ring pattern. The ringpatterns can differ for an internal incoming call or an external incomingcall.Step 1 To change the Station Ring pattern, press FNC+3+4+3. A Station RingPattern dialog box displays (Figure 3-39).Figure 3-39 Station Ring Pattern dialog boxStep 2 Select L1 or L2* by using the Scroll Sor Scroll T keys. For Mode 2*systems, a Station Ring Options dialog box displays (Figure 3-40).Figure 3-40 Station Ring Options dialog boxStep 3 Press the Scroll W or Scroll X keys, or the number key to select adifferent Station Ring Pattern.Step 4 Press the FNC key to confirm.A setting tone will ring and then the PSIII returns to a standby state aftertwo seconds.[1]L1[2]L2STN RingSTN Ring1 2 3 4 5 6 7 8NOTEThe default Station Ring pattern is 1.NOTE*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (orlater) must be used.
