3-26 Using the PSIIIDterm PSIII User Guide - Revision 1LED FlashThis feature controls the LED Ring Indicator. A Red Light indicates anincoming call.To Turn On LED FlashStep 1 Press FNC+3+1+7. A LED Flash dialog box displays (Figure 3-26).Figure 3-26 LED Flash dialog boxStep 2 For Mode 2* systems, select [1] On and then press the FNC key or 1.A setting tone will ring and then the PSIII returns to a standby state aftertwo seconds.To Turn Off LED FlashStep 1 Press FNC+3+1+7. A LED Flash dialog box displays (Figure 3-26).Step 2 For Mode 2* systems, select [2] Off and then press the FNC key or 2.A setting tone will ring and then the PSIII returns to a standby state aftertwo seconds.[1]On[2]OffLED FlashNOTE*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (orlater) must be used.
