3-54 Using the PSIIIDterm PSIII User Guide - Revision 1Figure 3-75 Reset All Confirmation dialog boxStep 4 Press the FNC key to confirm. An Execute dialog box displays(Figure 3-76).Figure 3-76 Execute dialog boxStep 5 Press the FNC key to confirm. A confirmation screen displays.Step 6 Press the FNC key to confirm.A setting tone will ring and then the PSIII returns to a standby state aftertwo seconds.Access Soft KeysThe following is an example of soft key codes (when they have beenprogrammed).Step 1 Press FNC+4. A Soft Key dialog box displays (Figure 3-77).Figure 3-77 Soft Key dialog boxStep 2 Select the soft key by using the Scroll T or Scroll S keys.Step 3 Press the FNC key or the number to confirm. A Pick dialog box displays(Figure 3-78).Reset All?Execute?NOTE*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (orlater) must be used.Soft Key[1]PICK[2]PARK[3]CAMP
