3-38 Using the PSIIIDterm PSIII User Guide - Revision 1Step 9 Press the FNC key to enter.Step 10 Press the FNC key to confirm.A setting tone will ring and then the PSIII returns to a standby state aftertwo seconds.Call Forwarding - All CallsThis feature allows you to set the access code to establish callforwarding on all calls.To Set the Call Forwarding - All Calls Access CodeStep 1 Press FNC+3+5+3. A Call Forwarding - All Calls dialog box displays(Figure 3-47).Figure 3-47 Call Forwarding - All Calls dialog boxStep 2 Press the FNC key or 1. For Mode 2* systems, a Call Forwarding - AllCalls Access Code dialog box displays (Figure 3-48).Figure 3-48 Call Forwarding - All Calls Access Code dialog boxStep 3 Type in the access code to establish Call Forwarding - All Calls.Example: *2=Call Forwarding - All, Set.NOTECheck with your system administrator for the list of access codes.[1]Set[2]ResetCFW ALLNOTE*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (orlater) must be used.Access No?
