Configuring Your Server 4-13SecurityThe Security menu appears if you move the cursor to the position of "Security."Press Enter on "Set Supervisor Password" or "Set User Password," to display the following screen.Enter the passwords on the dialog box. Passwords may have up to eight characters includingalphanumerics and symbols.IMPORTANT: User password can be set only when Supervisor password is alreadyset. Set the passwords only after OS is installed.See the table below for the items.Option Parameter Description Your SettingSecurity ChipConfiguration– Security Chip Configuration submenuis displayed.SupervisorPassword IsClearSetStatus only, user cannot modify.Once set, this can be disabled bysetting it to a null string, or by clearingpassword jumper on system board(see Configuring Mother BoardJumpers in this Chapter).User Password Is ClearSetStatus only, user cannot modify.Once set, this can be disabled bysetting it to a null string, or by clearingpassword jumper on system board(see Configuring Mother BoardJumpers in this Chapter).Set SupervisorPasswordUp to eightalphanumericsWhen the key is pressed, theuser is prompted for a password;press ESC key to abort. Once set, thiscan be disabled by setting it to a nullstring, or by clearing password jumperon system board (refer to ConfiguringMother Board Jumpers in thischapter).
