Configuring Your Server 4-43Others Clear ConfigurationClears configuration information. Select "Configure" → "Clear Configuration" from theTOP menu. Executing "Clear Configuration" clears all configuration information on theRAID Controller and hard disk drives. The configuration information on all channels ofthe RAID Controller is also cleared.NOTES: When configuration information on the RAID Controller and that onthe hard disk drive do not match (excluding at replacement of faultyRAID Controller), configuration mail fail if you select theconfiguration information on the RAID Controller. In this case,execute "Clear Configuration" to create configuration again. LSI Software RAID Configuration Utility cannot delete each virtualdrive. Use Universal RAID Utility instead. Force OnlinePuts a hard disk drive being in the FAIL status online.Select "Objects" → "Physical Drive" → (select hard disk drive) → "Force Online" fromthe TOP menu. Rebuild RateSets the Rebuild Rate.Select "Objects" → "Adapter" → "Sel. Adapter" → "Rebuild Rate" from the TOP menu.Available value is between 0% and 100%. Default value (recommended) is 30%. Hard disk drive informationChecks hard disk drive information.Select "Objects" → "Physical Drive" → (select hard disk drive) → "Drive Properties"from the TOP menu.
