Installing Windows Server 2008 5-25Setting WOLRefer to the following procedure to enable WOL.1. Start Device Manager.2. Point to [Network adapters] and double click [Intel(R) 82567LM-2 Gigabit NetworkConnection]/[Intel(R) 82574L Gigabit Network Connection] to open the adapter[Properties].3. Click [Power Management] tab and change setting in [Wake On LAN] according to thefollowing list.Setting item Change setting"Wake On Directed Packet" ON"Wake On Magic Packet" ON"Wake on Magic Packet from power off state" ON"Wake on Link" OFFNOTES: [Power Saver Options] setting is not necessary to change. Above setting will be maintained until manually resetting areexecuted.IMPORTANT: The parameters of [Wake On LAN] will not exist, ifthe network ports are not available for WOL.4. Click [OK].5. Restart the system.
