7-22 Installing Windows Server 20039. Refer to the following procedure to set the team member adapter priority status.– Set PrimaryPoint the adapter and click [Set Primary] button.– Set SecondaryPoint the adapter and click [Set Secondary] button.NOTE: Adapter priority config can be confirmed by the followingprocedure:1. Click [TEAM: "Team name"] from [Device manager] → [Networkadapters].2. Click [Settings] and confirm Adapters in team list.10. Click [Test Switch] → [Run test] to confirm the adapter team is properly setup.Confirm the result in [Test results].11. Restart the system.Remove Team1. Open the [Device Manager].2. Click [Network adapters], and open [TEAM: "Team name"] properties.3. Click [Setting] tab.4. Click [Remove Team] button.5. Click [Yes] to the message.6. Confirm [TEAM: "Team name"] adapter is not existing in [Network adapters] tree andrestart the system.
