System Configuration 4-25Monitoring ConfigurationSelect “monitoring Configuration” on the Server menu and press Enter to display the followingscreen.Option Parameter DescriptionFRB-2 timer Disabled[Enabled]Select whether or not to enable the FRB-2 timer.Boot Monitoring Disabled5 minutes[10 minutes]15 minutes20 minutes25 minutes30 minutes35 minutes40 minutes45 minutes50 minutes55 minutes60 minutesSelect whether or not to enable the timer for bootmonitoring at startup. If you are starting up from an OSwith no NEC ESMPRO Agent installed, disable thisoption. If you use Disaster Recovery Option forARCServe, select [Disabled].Option ROM ScanMonitoringDisabled[Enabled]Select whether or not to enable the function to monitorthe option ROM scan.Option ROMMonitoring Time-out1-[5]-20 Set the timeout of the option ROM scan. This option isdisplayed when the Option ROM Scan menu is set to[Enabled] (unit: minute).POST PauseMonitoringDisabled[Enabled]Set whether or not to enable the POST monitoringfunction during boot pause.POST PauseMonitoring Time-out1-[3]-20 Set the time for POST monitoring during boot pause.This option is displayed when the POST PauseMonitoring menu is set to [Enabled] (unit: minute).[ ]: Factory-set
