2-4 Setting Up the System Set the voltage switch correctly for your area. The correctsetting for the U.S. and Canada is 115V.! WARNINGSet the voltage switch correctly for your area. Connect the power cable to the system power socket at therear of the system unit. Connect the other end to a surgeprotector (recommended) or a properly grounded walloutlet.! CAUTIONNEC CSD recommends connecting the powercable to a surge protector.StartupPress the power button to start up the system. The powerlamp lights green to indicate that the system is on. The NECstartup screen appears.At the bottom of this screen, messages like the followingappear:Press key if you want to run SetupPress ESC to display POST
