4-50 Installing Options6. Replace all devices, covers, and rails in the accessible device cage sothey are right-side up in the drive cage. Place them in the same orderthey were in before. See the following sections for the procedures.! “Storing and Retrieving Unused Rails”! “Replacing a Bay Cover”! “Installing a 5 1/4-Inch Accessible Device”! “Installing a 3 1/2-Inch Accessible Device”Accessible device placement for a desktopA – 5 1/4-Inch Bays on Top B – 3 1/2-Inch Bracket in Lowest Bay7. Remove the logo plate by unclipping its tabs from inside the frontpanel.! Position the logo plate so it is readable when the chassis is in thehorizontal position.! Press the tabs into the front panel until they click in place.8. Replace the front panel (see “Replacing the Front Panel”).9. Replace the system cover (see “Replacing the Cover”).
