4-2 Installing OptionsThis chapter provides installation instructions for a variety of industry-standard and NECC expansion options that you can add to your system.Included in the chapter are procedures for! expansion board installation! memory module upgrade! processor upgrade! data storage device installation.Most procedures require removal of the system’s cover. Some proceduresalso require removing the front panel. Procedures for removing the coverand front panel are included in this chapter.In addition, the chapter includes procedures for setting up the system in adesktop orientation or back to the minitower orientation.General RulesFollow these general rules when installing system options.! Turn off system power and unplug the power cable.! Turn off and disconnect all peripherals from the front or rear of thesystem.! When handling boards or chips, touch the system metal frame todischarge static.! Do not disassemble parts other than those specified in the procedure.! All screws are Phillips-head unless otherwise specified.! Label any cable connector before disconnecting it. Note where theconnector goes and in what position it was installed.
