4-6 Installing OptionsReplacing the CoverReplace the cover as follows.Ensure that all cables inside the chassis arepositioned to prevent crimping, abrasion, or cutting while installing thecover. Check that the ribbon cables are folded along their fold lines andout of the direct path of the cover.1. Position the cover over the side of the chassis so that the back edge ofthe cover is about an inch beyond the back edge of the chassis (seethe following figure).2. Align the tabs and slots on the cover with those along the edges of thechassis.3. Align the locking tab slot at the bottom rear of the cover with thelocking tab.Replacing the coverA – Side Slots and Tabs C – Front Slots and TabsB – Locking Tab (hidden)
