Configuring the System 3-29Exit Menu ItemsMenu Item Settings (default is bold)Exit Saving Changes Implements the changes just made, andexits BIOS.Exit Discarding Changes Exit leaving BIOS unchanged.Load Setup Defaults Loads default values for all BIOS setupfields.Discard Changes Load previous values from BIOS for allsetup fields.Save Changes Saves all setup value changes to BIOS.Hard Drive SecurityYour NEC PowerMate CT system allows establishing passwordprotection for the internal hard drive. Hard disk drive (HDD) passwordprotection restricts access to the drive only if the drive is removed fromthe PowerMate CT system and installed in another system. The systemdoes not prompt you to enter your HDD passwords while the driveremains in the current system.The HDD passwords are written to the system BIOS and to the hard driveto ensure that the password protection travels with the drive if it is movedto another system.Establishing Hard Disk Drive PasswordsTo establish password protection for the system’s hard drive, you mustestablish a master password, establish a user password, and enable theestablished passwords for the internal hard drive. Use the followingprocedure to establish HDD passwords and to enable HDD passwordprotection.
