4-52 Installing OptionsAccessible device placement for a minitowerA – 3 1/2-Inch Bracket B – 5 1/4-Inch Bays7. Remove the logo plate by unclipping its tabs from inside the frontpanel.! Position the logo plate so it is readable when the chassis is in thevertical position.! Press the tabs into the front panel until they click in place.8. Replace the front panel (see “Replacing the Front Panel”).9. Replace the system cover (see “Replacing the Cover”).10. Set the system in a vertical position.11. Reconnect any external options (such as a keyboard and monitor) tothe front or rear of the system unit.12. Reconnect the power cable to the system and to a properly groundedwall unit or surge protector.
