2-8 Setting Up the System2. Remove all removable media from your drives, including CDs,DVDs, CD-RW discs, diskettes, Zip disks, and tape cartridges.3. Turn off the system unit and any external options connected to it.4. Unplug the system unit power cable from the wall outlet or surgesuppressor, then from the unit itself.5. Unplug any external options from the wall outlets or surgesuppressor, then disconnect them from the system unit.6. Pack the system components in the original shipping materials andcartons. If these are not available, be sure to use adequate packingmaterials to protect the components.To set up your system, follow the steps on the PowerMate CT QuickSetup poster that comes with the system.More InformationOnce you have your system up and running, we suggest that you do thefollowing:! Install applications provided by NECC.! See “Setting Up a Healthy Work Environment” in Appendix A.! Install any of your own applications. See the documentation thatcomes with the application.See the following quick reference chart to find information about usingthe system.
