353. Convenient Features Using the Optional Remote Mouse Receiver (NP01MR)The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote control.It is a great convenience for clicking through your computer-generated presentations.Connecting the remote mouse receiver to your computerIf you wish to use the remote mouse function, connect the mouse receiver and computer.The mouse receiver can be connected directly to the computer’s USB port (type A).NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or changeyour computer settings.Remote mouse receiverComputerTo USB port of PC or MacintoshWhen operating a computer via the remote mouse receiverRemote sensor on the remote mouse receiver7 m/22 feetWhen connecting using the USB terminalFor PC, the mouse receiver can only be used with a Windows XP*, Windows Vista, Windows 7, or Mac OS X 10.0.0or later operating system.* NOTE: In SP1 or older version of Windows XP, if the mouse cursor will not move correctly, do the following:Clear the Enhance pointer precision check box underneath the mouse speed slider in the Mouse Properties dialog box [PointerOptions tab].NOTE: The PAGE and buttons do not work with PowerPoint for Macintosh.NOTE: Wait at least 5 seconds after disconnecting the mouse receiver before reconnecting it and vice versa. The computer may notidentify the mouse receiver if it is repeatedly connected and disconnected in rapid intervals.
