1566. Installation and ConnectionsCOMPUTER 2 INCOMPUTER 3 INCOMPUTER 1 INComputer cable (VGA) (supplied)To mini D-Sub 15-pin connectoron the projector. It is recommend-ed that you use a commerciallyavailable distribution amplifier ifconnecting a signal cable longerthan the cable supplied.NOTE: For Macintosh, use a commercially available pin adapter (notsupplied) to connect to your Mac’s video port.RGB - to - BNC cable (notsupplied) Making ConnectionsThe projector can be connected to a computer using the computer cable, a 5 x BNC cable, HDMI cable or DisplayPortcable.Prepare commercially available cables for connection.Analog RGB signal connection• Connect the computer cable between the computer’s display output connector (mini D-Sub 15-pin) and the projector’sComputer 1 or Computer 2 video input connector.• When connecting the computer’s display output connector (mini D-Sub 15-pin) and the projector’s Computer 3video input connector, use a BNC cable (5-core) → mini D-Sub 15-pin converter cable.• To output audio from the computer, use commercially available audio system.• Select the source name for its appropriate input connector after turning on the projector.Input connector SOURCE button on the projectorcabinet Button on the remote controlCOMPUTER 1 IN COMPUTER 1 COMPUTER 1COMPUTER 2 IN COMPUTER 2 COMPUTER 2COMPUTER 3 IN COMPUTER 3 COMPUTER 3
