2079. AppendixLens shifting rangeThis projector is equipped with a lens shift function for adjusting the position of the projected image by using the LENSSHIFT ▼▲◀▶ buttons. The lens can be shifted within the range shown below.Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of theprojected image).NOTE: The lens shift function cannot be used when using the NP16FL lens.Desk/front projection1V1H0.1H 0.1H0.5VHeight of projected imageWidth of projected imageCeiling/front projector1V1H0.1H 0.1H0.5VHeight of projected imageWidth of projected imageEx.: When projecting on a 150" screenAccording to the tables of screen sizes and dimensions for 16:10 (→ page 206), H = 323.1 cm, V = 201.9 cm.Adjustment range in the vertical direction: The projected image can be moved upwards 0.5 × 201.9 cm ≈ 101 cm,(when the lens is at the center position). For a ceiling/front installation, the above figures are inverted.Adjustment range in the horizontal direction: The projected image can be moved to the left 0.1 × 323.1 cm ≈ 32 cm,to the right 0.1 × 323.1 cm ≈ 32 cm.* Figures differ by several % because the calculation is approximate.
