1065. Using On-Screen MenuSelecting the Aspect Ratio [ASPECT RATIO]Use this function to select the screen’s vertical:horizontal aspect ratio.Select the screen type (4:3 screen, 16:9 screen or 16:10 screen) at the screen setting before setting the aspect ratio.(→ page 116)The projector automatically identifies the signal being input and sets the optimum aspect ratio.For Computer signalFor Component/Video/S-Video signalsWhen the screen type is set to 4:3 When the screen type is set to 16:9 or 16:10Resolution Aspect RatioVGA 640 × 480 4:3SVGA 800 × 600 4:3XGA 1024 × 768 4:3WXGA 1280 × 768 15:9WXGA 1280 × 800 16:10HD(FWXGA) 1366 × 768 approx. 16:9WXGA+ 1440 × 900 16:10SXGA 1280 × 1024 5:4SXGA+ 1400 × 1050 4:3WXGA+ 1600 × 900 16:9UXGA 1600 × 1200 4:3WSXGA+ 1680 × 1050 16:9FHD(1080P) 1920 × 1080 16:9WUXGA 1920 × 1200 16:10Options FunctionAUTO The projector will automatically determine the incoming signal and display it in its aspect ratio.The projector may erroneously determine the aspect ratio depending on its signal. If this occurs,select the appropriate aspect ratio from the following.4:3 The image is displayed in 4:3 aspect ratio.5:4 The image is displayed in 5:4 aspect ratio16:9 The image is displayed in 16:9 aspect ratio15:9 The image is displayed in 15:9 aspect ratio16:10 The image is displayed in 16:10 aspect ratio
