222. Projecting an Image (Basic Operation)Adjusting the vertical position of a projected image (Lens shift)CAUTION • Perform the adjustment from behind or from the side of the projector. Adjusting fromthe front could expose your eyes to strong light which could injure them.• Keep hands away from the lens mounting portion while the lens shift is in operation.Failure to do so could result in hands being pinched by the moving lens.NOTE:• The lens shift function is not available on the projector with NP16FL lens installed.Return the lens shift position to the home position before installing the lens to the projector.• Shifting the lens to the maximum in two directions combined will cause the edges of the image to become dark or will causesome shadows.Adjusting with buttons on the cabinet1. Press one of the LENS SHIFT ▼▲◀▶ buttons.2. Use the LENS SHIFT ▼▲◀▶ buttons to move the projected image.Returning the lens shift position to the home positionPress and hold the SHUTTER/HOME POSITION button for 2 seconds to return the lens shift position to the homeposition (nearly center position)
