71. IntroductionTerminal Panel Features1. COMPUTER 1 IN/ Component Input Connector (Mini D-Sub 15 Pin) (→ page 13, 156, 161)2. COMPUTER 2 IN / Component Input Connector (Mini D-Sub 15 Pin) (→ page 156, 161)3. COMPUTER 3 IN/Component (R/Cr, G/Y, B/Cb, H, V) Connectors (BNC × 5) (→ page 156, 161)4. HDMI IN Connector (Type A) (→ page 157, 158, 162)5. DisplayPort IN Connector (DisplayPort 20P)(→ page 157)6. MONITOR OUT (COMP 1) Connector (Mini D-Sub 15 Pin) (→ page 159)7. VIDEO IN Connector (BNC) (→ page 160)8. S-VIDEO IN Connector (Mini DIN 4 Pin) (→ page 160)9. LAN Port (RJ-45) (→ page 163)10. USB Port (Type A) (→ page 70)11. PC CONTROL Port (D-Sub 9 Pin) (→ page 225)Use this port to connect a PC or control system. This enables you to control the projector using serial communica-tion protocol. If you are writing your own program, typical PC control codes are on page 225.12. REMOTE Connector (Stereo Mini)Use this connector for wired remote control of the projector using the NEC optional remote control.Connect the projector and optional remote control using a commercially available wired remote control cable.13. USB (LAN) Port (for optional Wireless LAN Unit) (→ page 164)14. Optional Slot (SLOT) (→ page 211)9 4 5 3 810 2 1 71311 12 14 6
