2149. AppendixDisplayPortSignal Resolution ( dots ) Aspect Ratio Refresh Rate ( Hz )VGA 640 × 480 4 : 3 60SVGA 800 × 600 4 : 3 60XGA 1024 × 768 4 : 3 60HD 1280 × 720 16 : 9 60WXGA 1280 × 768 15 : 9 601280 × 800 16 : 10 601366 × 768 *1 16 : 9 60Quad-VGA 1280 × 960 4 : 3 60SXGA 1280 × 1024 5 : 4 60SXGA+ 1400 × 1050 4 : 3 60WXGA+ 1440 × 900 16 : 10 60WXGA++ 1600 × 900 16 : 9 60WSXGA+ 1680 × 1050 16 : 10 60UXGA 1600 × 1200 4 : 3 60Full HD 1920 × 1080 16 : 9 60WUXGA 1920 × 1200 16 : 10 60 (Reduced Blanking)HDTV(1080p) 1920 × 1080 16 : 9 50/60HDTV (720p) 1280 × 720 16 : 9 50/60SDTV (480p) 720 × 480 4:3 / 16:9 60SDTV (576p) 720 × 576 4:3 / 16:9 50ComponentSignal Resolution ( dots ) Aspect Ratio Refresh Rate ( Hz )HDTV(1080p) 1920 × 1080 16 : 9 50/60HDTV(1080i) 1920 × 1080 16 : 9 50/60HDTV (720p) 1280 × 720 16 : 9 50/60SDTV (480p) 720 × 480 4:3 / 16:9 60SDTV (576p) 720 × 576 4:3 / 16:9 50SDTV(480i) 720 × 480 4:3 / 16:9 60SDTV(576i) 720 × 576 4:3 / 16:9 50Composite Video/S-VideoSignal Aspect Ratio Refresh Rate ( Hz )NTSC 4 : 3 60PAL 4 : 3 50PAL60 4 : 3 60SECAM 4 : 3 50*1 The projector may fail to display these signals correctly when [AUTO] is selected for [ASPECT RATIO] in the on-screen menu.The factory default is [AUTO] for [ASPECT RATIO]. To display these signals, select [16:9] for [ASPECT RATIO].*2 The projector may fail to display these signals correctly when [AUTO] is selected for [ASPECT RATIO] in the on-screen menu.The factory default is [AUTO] for [ASPECT RATIO]. To display these signals, select [4:3] for [ASPECT RATIO].• Signals exceeding the projector’s resolution are handled with scaling technology.• With scaling technology, the size of characters and ruled lines may be uneven and colors may be blurred.• Upon shipment, the projector is set for signals with standard display resolutions and frequencies, but adjustmentsmay be required depending on the type of computer.
