NEC SuperScript 4200 Network Manual

Contents

NEC SuperScript 4200 Network Manual Manual pdf 36 page image

32 SuperScript Color Laser Network GuideN ET W ARE 3. XComplete these basic tasks to configure NetWare 3.x bindery-based services for your printer. Begin by:Starting PCONSOLELog in to NetWare 3.x with Administrator rights and startPCONSOLE.Defining the Print Queue1. Select Print Queue Information from the AvailableOptions menu and press ENTER.2. Press INSERT, type a name for the new queue to beserviced by the NIC and press ENTER. Press ESCAPE toreturn to the Available Options Menu.Defining the Print Server1. Select Print Server Information from the AvailableOptions menu and press ENTER.2. Press INSERT, type the NIC Print Server Name and pressENTER.note: The Print Server Name you enter should matchthe name shown on the Network Settings page underNovell Network Information.Defining the Printer1. Press ENTER with the new Print Server Highlighted,select Print Server Configuration and press ENTER, thenselect Printer Configuration and press ENTER.2. In the Configured Printers list, select an unused printernumber and press ENTER. In the Printer <#>Configuration screen, define a new name for the printerif desired. (The printer name is displayed in variousNetWare printing messages.)3. Press ESCAPE to exit and select Yes to save the changes.Press ESCAPE again to return to the Printer ServerConfiguration menu.Assigning the Print Queue1. Select Queues Serviced By Printer and press ENTER.Highlight the desired printer on the Defined Printers listand press ENTER.2. Press INSERT to display the Available Queues list. Selectthe desired queue and press ENTER. Assign a Prioritylevel (recommended choice is 1) and press ENTER.3. Press Alt-F10 to exit PCONSOLE.Confirming Successful Configuration1. Turn the printer off and on and wait for a NetworkSettings page to print. If the network is large, this maytake several minutes.2. The Novell Connection Information area on the NetworkSettings page displays the printer name, file server,queue, etc. If it displays Attached: Yes, this confirms thatthe NIC Print Server is ready to accept print jobs. If not,verify that the Print Server name matches exactly thePrint Server name that was entered in PCONSOLE.Installing and Configuring Your Printer DriverIn Windows, use the Add Printer feature to install andconfigure a SuperScript printer driver in each workstationthat will access the network printer.note: SuperScript printer drivers are on the SuperScriptCD that came with the printer.Specify that the printer will be attached as a Network Printer,and set the Port to the printer queue you just created. (TheWindows NT 4.0 driver installs automatically to LPT1:. Afterinstallation, you can manually reset the port to your NetWarequeue.)Check the Novell ConnectionInformation area on theNetwork Settings page. If youexperience difficulty call NECprinter tech support at 1-800-632-4650.