12 SuperScript 4650 Series — User’s GuideU NPACKINGFollow these steps to safely unpack the printer:1. Open the top cover of the shipping box.2. Remove the optional 2nd Tray box (if you have the4650NX model) and remove the QuickStart poster.3. Open the inner printer box and remove the Accessory kitand Starter kit.4. Turn the large plastic box screws at the bottom of the boxto the left (A) and pull them out (B).5. Using your thumb and finger, remove the plastic screwsleeves from the box (C).6. Lift off the outer box (D).7. Open the plastic bag that contains the printer and slide itdown.8. With one person on each side of the printer, grasp theprinter at the hand grips where they are exposed bynotches in the foam padding (E).9. Lift the printer and place it on a sturdy, level surface.If you are setting up a 4650NX printer unpack theoptional 250-sheet Tray and attach it first beforeinstalling anything inside the printer!See Page 28 in Chapter 3 or the 4650 Series QuickStart.A B CD EUnpacking the Inner Printer Boxnote: Save the box, box screws,and packing material. If you shipthe printer in the future, be sure tofollow the special packinginstructions in Appendix D tosafeguard internal components.Caution! The printer and packagingweigh approximately 100lbs. To set up theprinter and move it requires two adults.
