UNIVERGE SV8100 Issue 1.0SV8100 Features and Specifications Manual 2 - 1099TAPI CompatibilityDescriptionThe system has Telephony Applications Programming Interface (TAPI) compatibility that provides:R Reduced TAPI Feature Set (see the Supported TAPI Commands chart below).R Caller ID data to the PC for data base lookups and screen pops (see the Caller ID Data chart below).R Telephone control (Off-Hook, On-Hook and dialing).The 1st Party TAPI Ethernet Driver provides an interface that allows the user personalized control of thetelephone system from a desktop or laptop PC when used in conjunction with a TAPI-compliantapplication. The telephone system and PC are connected by installing an adapter on the telephonemultiline terminal, allowing the PC user to access sophisticated communications services via thetelephone lines.ConditionsP A maximum of 128 1st Party CTI over ethernet connections is supported. Any DesktopApplications connections will take away from the 128 maximum connections.P Caller ID and Call status are available from the TAPI interface functions.P Only one 3rd Party CTI connection to the SV8100 is supported. If a SV8100 system hasUCB (Unified Communications for Business), then the 3rd Party Shared Services feature ofSV8100 Desktop Applications cannot be used. If a SV8100 system has SV8100 DesktopApplications with the 3rd Party Shared Services, then UCB cannot be used.P Refer to Table 2-29 TAPI Commands for a list of supported TAPI commands.P The TAPI Compatibility feature does not support CAP keys 1000-9999. Only 0001-0999 canbe supported.Table 2-29 TAPI CommandslineAddProvider lineAnswerlineConfigDialog lineBlindTransferlineGetAddressCaps lineCompleteCalllineGetDevCaps lineCompleteTransferlineGetDevConfig lineDevSpecificlineGetIcon lineDiallineGetID lineDroplineInitializeEx lineForwardlineNegotiateAPIVersion lineHoldlineNegotiateExtVersion lineMakeCalllineRemoveProvider lineParklineSetDevConfig linePickup
