Issue 1.0 UNIVERGE SV81002 - 14 Account Code – Forced/Verified/Unverified20-13-20 Class of Service Options(Supplementary Service) –Account Code/Toll RestrictionOperator Alert (RestrictedOperation Transfer)In an extension Class of Service,turns On (1) or Off (0) the OperatorAlert when a forced account code isincorrectly entered.0 = Off1 = On(default = 0 for COS01~15)321-24-01 Forced Access Dialing –Emergency Number00021-01-14 System Options for OutgoingCalls – Forced Account CodeInter-digit TimerThe system waits this time for auser to enter a Forced Accountcode.0~64800 (seconds)(default = 3 seconds) 321-04-01 Toll Restriction Class forExtensionsUse this option to assign a TollRestriction Class (1~15) to anextension.Day/Night Mode1~9 (9 = Power FailureMode)1~15(default = 2)335-05-01 Account Code Setup – AccountCode ModeFor each Class of Service (1~15)use this option to select the AccountCode Mode.0 = Account Codesdisabled (None)1 = Account Codesoptional2 = Account Codesrequired but not verified(No verify)3 = Account Codesrequired and verified(Verify)(default = 0)335-05-03 Account Code Setup – AccountCodes for Incoming CallsFor each Class of Service (1~15),enter 1 in this option to EnableAccount Codes for incoming calls.Enter 0 to Disable Account Codesfor incoming calls. If disabled, anycodes you enter dial out on theconnected trunk.0 = Disable AccountCodes for incoming calls1 = Enable Accountcodes for incoming calls(default = 0)335-05-04 Account Code Setup – HidingAccount CodesFor each Class of Service (1~15),enter 1 to have the system hideAccount Codes on an extensiondisplay as they are entered. Enter 0to have the Account Codesdisplayed.0 = Account CodesDisplayed1 = Account Codes notDisplayed(default = 0)335-06-01 Verified Account Code Table –Verified Account CodeUse this option to enter data into theVerified Account Code Table. Youcan enter up to 2000 codes from3~16 digits in length. For a wild card@, press the LK 1.Up to 16 digitsEnter: 1~9, 0, #, @(@ = Wild Card)(default not assigned)340-10-01 Voice Announcement ServiceOption – VRS Fixed MessageEnable (1) or Disable (0) the systemability to play the fixed VRSmessages (such as You have amessage).0 = Not Used1 = Used(default = 0) 3ProgramNumber Program Name Description/Comments Assigned DataLevel1 2 3
