Issue 1.0 UNIVERGE SV81002 - 626 IP Single Line Telephone (SIP)SIP Extension Basic Information Setup:ProgramNumber Program Name Description/Comments Assigned DataLevel1 2 384-20-01 SIP Extension Basic InformationSetup – Registrar/Proxy PortUse this program to define SIPstation Proxy Port.1~65535(default = 5070) 384-20-02 SIP Extension Basic InformationSetup – Session Timer ValueUse this program to define theperiodic refresh time that allowsboth user agents and proxies todetermine if the SIP session is stillactive.0~65535(default = 180)384-20-03 SIP Extension Basic InformationSetup – Minimum Session TimerValueUse this program to define toconvey the minimum allowedvalue for the SIP session timer.0~65535(default = 180) 384-20-04 SIP Extension Basic InformationSetup – Called Party InfoUse this program to define the SIPExtension presented Caller IDinformation.0 = Request URI1 = To Header(default = 0)384-20-05 SIP Extension Basic InformationSetup – Expire Value of InviteUse this program to define thetime out response value for SIPinvite.0~256 (seconds)(default = 180seconds)384-26-01 IPL Basic Setup – IP Address Assign the IP address for eachDSP on the IPLA.xxx.xxx.xxx.xxxDefaults:Slot 1 = 172.16.0.20:Slot 4 = 172.16.0.44384-26-02 IPL Basic Setup – RTP PortNumberAssign the RTP port number to beused for each DSP on the IPLA.0~65534Defaults:VoIP GW1 = 10020VoIP GW2 = 10052VoIP GW3 = 10084VoIP GW4 = 10116VoIP GW5 = 10148VoIP GW6 = 10180VoIP GW7 = 10212VoIP GW8 = 10244384-26-03 IPL Basic Setup – RTCP PortNumber (RTP Port Number + 1)0~65534Defaults:VoIP GW1 = 10021VoIP GW2 = 10053VoIP GW3 = 10085VoIP GW4 = 10117VoIP GW5 = 10149VoIP GW6 = 10181VoIP GW7 = 10213VoIP GW8 = 102453
