B-2 NEO Hand-Held with Windows Mobile 6.1 Classic User ManualAppendix B: Teklogix Imagers AppletPredefined Presets• Imaging for photo capture.• Imaging for bar code decoding.• Symbology selection.At any time, only one preset of each type can be designated as the user-selectedactive preset.B.2.1 Predefined PresetsPredefined presets are built into the imaging software and cannot be changed. The pre-defined presets allow you to use the imager to perform specified tasks without having tounderstand and set numerous variables. In almost all cases, these predefined presetsare sufficient.B.2.2 Bar Code Predefined PresetsThese presets encompass the majority of the most popular bar codes and their subtypes. Thebar code decoding symbology predefined presets define which bar codes can be decoded.The bar code decoding camera predefined presets determine how the bar code imagesare captured.B.2.2.1 Bar Code Decoding Symbology Predefined PresetsThe following presets select groups of similar bar codes for decoding.Factory DefaultThis preset enables the decoding of frequently used bar codes.My DefaultThis preset uses the Symbology Settings menu to define the preset. For details about theSymbology Settings menu, refer to “Bar Coding Tab – Configuring Symbologies” on pageB-16.AllThis preset enables the decoding of all bar codes that the imager can decode.LinearThis preset enables the decoding of all the 1D symbologies that the imager can decode.Note: It is recommended that the default preset be used whenever possible.
