C-2 NEO Hand-Held with Windows Mobile 6.1 Classic User ManualAppendix C: Bar Code SettingsDecoded (Internal) ScannerC.2 Decoded (Internal) ScannerC.2.1 Options – Decoded (Internal) ScannerDot Time (msec)The value selected for “Dot Time (msec)” determines (in milliseconds) how long the target-ing dot remains on before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec,200 msec or 400 msec. A value of 0 (zero) disables the target dot.Laser On TimeThe value assigned to this parameter determines how long the laser will remain on when thescan button or trigger is pressed.Double-tapping on this parameter displays a dialog box in which you can enter a valuebetween 5 and 99, measured in tenths of a second.C.2.2 Advanced Options – Decoded (Internal)Scan ModeWhen you double-tap on this parameter, a dialog box is displayed in which you can choose ascanning mode: Scan beam only, Aim with Scan: 1 trigger pull, Aim with Scan: 2 triggerpulls, Aim with Scan on trigger release, and Continuous Scan Mode.
