C-6 NEO Hand-Held with Windows Mobile 6.1 Classic User ManualAppendix C: Bar Code SettingsCode 39Delete Char Set ECIsSetting this parameter to on enables the scanner to delete any escape sequences representingCharacter Set ECIs – Extended Channel Interpretations (also known as GLIs) from its bufferbefore transmission.When this parameter is enabled, the scanner transmits data from PDF417 and MicroPDF417bar codes containing Character Set ECIs, even when the ECI Protocol is disabled.ECI DecoderSetting this parameter to on enables the scanner to interpret any Extended Channel Interpre-tations (ECIs) supported by the scanner. This parameter has no effect on symbols that werenot encoded using ECIs.If this parameter is set to off and a symbol that was encoded using an ECI escape is scanned,the scanner transmits the ECI escape followed by the uninterpreted data.C.2.5 Code 39EnabledSetting this parameter to ‘on’ enables “Code 39”.Enable Trioptic Code 39Trioptic Code 39 symbols always contain six characters. Setting this parameter to on allowsthis type of symbology to be recognized.Convert To Code 32Setting this parameter to on allows the scanner to convert the bar code from “Code 39”to “Code 32”.Code 32 PrefixNote: “Trioptic Code 39” and “Full ASCII” should not be enabled simultaneously. Thescanner does not automatically discriminate between these two symbologies.Note: “Code 39” must be enabled in order for this parameter to function.Note: “Convert to Code 32” must be enabled in order for this parameter to function.
